How can a hospital reduce pain and delay in patient Discharge?

Patient discharge is the final process in a patient's stay in the hospital. Instead of being smooth process, often the discharge process creates pain for the patient as well as the hospital. The delay often is unpredictable and can span between 2 hours to a full day depending on how insurance clearance process is handled. The insurer-hospitals’ meeting on 9th of this month (October, 2025) has this process under discussion for the right reasons.
The delay for the hospital, means the room is occupied, instead of being prepared for the next patient. It also means pain and added room rental bill for the patient. Economic Times post claims, the delay is attributed to, mainly,

  • Legacy IT systems
  • Bureaucratic treatment file movement
  • “Avoidable” insurer queries
  • Final bill different from initially approved amount
  • Distrust, inefficient coordination between hospitals, insurers

We also found multiple earlier reports that highlight the pain of discharge process.

Here is a short summary:

# Study (Authors / Location) Setting & Sample Key Metrics (Delay, Time) Main Findings / Causes of Delay
1 Reducing discharge delays: using DMAIC approach in a tertiary care hospital (Sharma et al., Dehradun, Uttarakhand) (IJCMPH) Tertiary-care hospital, North India; 1,000 discharged patients Pre-intervention: discharge summary ~235 ± 78 min; financing clearance ~436 ± 451 min; total ~329 ± 389 min. Post-intervention: summary ~72.6 ± 42 min; clearance ~162.6 ± 95 min; total ~208.1 ± 122.9 min. (IJCMPH) Use of DMAIC (process improvement) reduced delays significantly. Bottlenecks: financing clearance, summary preparation.
2 A cross‑sectional study on delay in discharge in a tertiary care hospital in the Malwa region of Punjab (Sharma et al., Bathinda, Punjab) (CiteDrive) Tertiary hospital; n = 250 patients ~80% of participants faced delay; ~40% spent more than 5 h to complete discharge. Average time nearly double the standard set by National Accreditation Board for Hospitals & Healthcare Providers (NABH) standards. (CiteDrive) Delays at almost all steps except “return of medicines”; patient dissatisfaction high (only ~20% fully satisfied).
3 (Indian hospital, general ward) (Annals of Pediatric Surgery) Paediatric surgery general ward; n = 100 sequential discharges Self‐pay group average turn-around time (TAT) ~332 min; credit billing group ~397 min. NABH standard was 180 min (self pay) / 240 min (credit billing) but delays existed. (Annals of Pediatric Surgery) Credit billing (insurance/third-party) patients experienced larger delays. Main delay causes: billing process, insurance processing systems.
4 Pristyn Care survey study (India wide) – “Five out of 10 patients face discharge delays due to medical insurance claims” (ETHealthworld.com) Survey across major Indian cities; size ~4,000 respondents. (Healthcare Radius) ~50% of patients report discharge delay due to claim processing time. ~40% attribute delay to hospital administrative processes; ~25% to lack of coordination between hospitals & insurers. (ETHealthworld.com) Claim/insurance-related delays are major contributor. Even with high cashless coverage, process inefficiencies persist.
5 Delay in discharge and its impact on unnecessary hospital bed occupancy (not India-specific, but relevant for comparison) (BioMed Central) Study of 99 inpatient episodes (elective & acute) in hospital over 4 months Delays contributed 271 unnecessary days (19% of total bed-occupancy days) due to discharge process delays. (BioMed Central) Highlights impact of discharge delay on bed occupancy and hospital efficiency; though not strictly India, gives useful context.

There is no magic bullet, otherwise the problem would have been solved by now. ET article identified a few suggestion to help the process. Among them are:

  • Advance intimation of discharge by hospitals
  • Efficient information exchange to cut down admin delays
  • Investigations by insurers should start earlier

Even others have pointed out other ways but bulk of them focus on the process improvement and better coordination between the hospital, TPA (Third-party Agency) and Insurance provider. There is no doubt that most of the time clearance process is stuck in the interaction chain between those three entities.

But it is also observed that RTLS does enable faster discharge by automating information flow which otherwise are done manually inside the various entities in the hospital.

How RTLS helped Hospitals reduce discharge delay

A hospital in Texas (CHRISTUS Santa Rosa Hospital‑Westover Hills) reported that after deploying RTLS tagged bracelets:

  • The system notified staff of open beds 2 hours 40 minutes sooner than manual entry. Healthcare IT News

  • They calculated this saved 2,339 hours of bed-prep/“pull next patient” time over 12 months for 4,000+ discharges. Healthcare IT News

Here are a few ways a RTLS helps a hospital to reduce the discharge delay:

     Faster bed/room turnover

  • When a patient leaves, an RTLS tag or location sensor can automatically notify housekeeping/cleaning/bed-prep teams, so they start the cleaning/preparation of the bed immediately (rather than waiting for manual notification). This reduces idle time from when a discharge is medically cleared to when the bed is ready for the next patient (or when the current patient exit tasks wrap up).

  • RTLS gives live location/status of patients, staff, equipment; this allows staff to see which patients are ready to go, which beds are vacant, and which pieces of equipment are available. BioMed Central+1
  • Delay in “waiting for transport” or “waiting for discharge summary" or "pharmacy clearance” often caused by lack of visibility. For example, if the system shows that a patient is ready but the porter or transport team hasn’t been dispatched, it causes unnecessary delay. An automated notification enables faster transition between these phases.

    Of course even with all these, bulk of the delay is not going to reduce more than 20% if the friction in documentation sharing, interaction and coordination between the three parties are not addressed. However even if 20% of the discharge time is shortened it creates a big saving for the Hospital in reducing average Length of Stay (LOS) for a patient

    A California Healthcare Foundation study found, "For a 275-bed hospital, reducing the average length of stay by four hours is equivalent to increasing physical capacity by ten beds".
    RTLS is slowly becoming integral to the improved cost and operational efficiency in a hospital. Here we showed how it also improves patient discharge latency.

Is Active RFID same as BLE?

Quick Answer: No, Active RFID is different to BLE although both are RF technologies. Both are used for RTLS but they are not the same.

Here is a quick reckoner:

Feature Active RFID Tag BLE Asset Tag
Read Range Up to 100 meters or more less than 100 meters
Frequency Band Typically 433/900 MHz or 2.4 GHz ISM 2.4 GHz
Battery Life 3–5 years 2–5 years
Data Transmission Continuous (beacon) or on-demand (transponder) Periodic beacons
Infrastructure Requires dedicated RFID readers and antennas Can leverage existing Bluetooth infrastructure
Cost Tag is cheaper but higher reader costs Magnitude lower per tag and infrastructure costs
Environmental Impact 433 MHz less affected by physical barriers 2.4 GHz is more crowded and more susceptible to interference
Integration Often requires specialized systems Easier integration with smartphones and tablets

RFID Reader is lot more expensive compared BLE gateway, which means you can implement a BLE based RTLS solution at a fractional cost of Active RFID solution. Also BLE is a lot more commoditized, which eliminates the fear of vendor lock-in.

Enhanced Security with SOS-enabled BLE Badge

Enhancing Staff Security with BLE Badge Featuring SOS Buttons

Imagine what would a dedicated nurse devoted to the patients and the hospital expect at minimum from the management?
Surely she would expect that her safety and security are taken care of while she is inside hospital.
Healthcare workers are often required to walk throughout the facility, sometimes in high-risk situations, and their safety should never be compromised. A practical, efficient solution to improve staff security is the introduction of BLE-enabled ID badge or BLE wristbands equipped with SOS buttons, offering a simple yet powerful way to alert security in moments of distress. BLE-enabled badge works for dual-purpose : as an ID badge as well as safety SOS device.

BLE Wristbands

BLE wristband with SOS buttonBluetooth Low Energy (BLE) technology allows for seamless, low-energy communication over short distances, making it ideal for environments like hospitals where staff are constantly on the move. A BLE wristband with an integrated SOS button ensures that the wearer can discreetly and instantly alert security personnel in the event of an emergency, regardless of their location within the hospital.

Patient Safety and Location Tracking

The wristband can be used for patients too. The wristband enables the hospital locate the patient in real-time when in need. It also enables the Patient to alert the nurse-station when in need. Pressing the SOS button sets off a buzzer in the nearest nurse station. It also flashes the location of the patient in App notification.

App Alerts for Immediate Response

A RTLS works in tandem to ensure that information flows in real time. The wristband SOS enables the staff send an immediate notification to the hospital security teams at the push of a button. Once activated, the SOS button triggers an alert, pinpointing the exact location of the distressed staff member within the facility. This swift communication allows security to respond faster, reducing the time it takes to reach the scene of an emergency.

Empowering Staff to Feel Secure

One of the most significant benefits of the wristband is the psychological comfort it provides. Knowing that help is just a button press away can make staff members, particularly women, feel more secure while performing their duties. They can focus on their work without constantly worrying about their safety, knowing that help is easily accessible in any situation—whether it’s an incident of harassment, a medical emergency, or a physical threat.

Discreet and Non-Intrusive

The Badge is designed to be lightweight, discreet, and comfortable, ensuring that staff can wear it throughout their shift without feeling encumbered. The SOS button is intuitive to use, and its small form factor allows it to blend seamlessly into the work attire of hospital staff. This non-intrusive nature ensures that it does not interfere with daily tasks but remains within easy reach in moments of need.

Building a Safer Work Environment

By adopting BLE wristbands with SOS buttons for all hospital staff, we create a safety net that reinforces the hospital’s commitment to employee well-being. This proactive measure is an investment in a safer, more supportive work environment where staff can feel protected and valued. In an unpredictable workplace like a hospital, staff members deserve the peace of mind that comes from knowing that their safety is a priority.

RFID or BLE for your Hospital RTLS?

BLE or RFID? - Things to consider before you decide for your hospital

A hospital RTLS primarily is a software that uses wireless technologies e.g. RFID, BLE or UWB, to provide you real time indoor location intelligence (for example, which asset is currently in which zone?) for your hospitals. Most RTLS vendors tie their software to a specific technology, which means deciding vendor itself selects the technology. But is the optimal? Would you not like to understand the cost-benefits independently before you let your vendor choose for you?

When it comes to hospital RTLS, hospitals in US have predominantly adopted RTLS based on RFID though cost is very high. It's also true that RFID (especially active RFID) based RTLS is there for a very long time. BLE in fact is a recent addition. Interesting thing is both BLE and active RFID uses 2.4 GHz band but while BLE standard is open, active RFID is often proprietary and therefore costlier.

Understanding RFID

RFID is wireless radio frequency (RF) based standard and works on multiple RF bands, designated as LF (Low Frequency), HF (High Frequency) and UHF (Ultra High Frequency). Accuracy and speed increases from LF to UHF. Main components of this technology is RF Tag, RF Antenna and RF Readers. RF Tag can be active which means the tag has a battery and sends data on its own. Passive RF tag on the other hand is without battery and it can only send the data using the reflected RF energy (from the reader). The advantage of passive RF Tag is that it has almost unlimited life (no battery replacement) and also costs 10 times less than an active RF tag. To read passive RF Tags, the RFID reader must use high-gain antenna.

UHF RFID operates at 860-930 MHz (For India designated band is 865-867 MHz) but the high gain makes it a little unattractive to use in radio-sensitive places inside the Hospital.

RFID protocols were designed for reading inventory which makes it little difficult to employ it for indoor location tracking in real time. Given the high cost of UHF RFID readers (above USD 1,000), building RFID infrastructure for a hospital is often prohibitively expensive. While most leading vendors started supporting WiFi in the their RFID readers in latest products, old models typically do not support WiFi, which means it needs its separate network making the installation expensive. For a medium-sized hospital, RFID infrastructure costs have been reported between $200,000 and $600,000, depending on the facility's size and specific requirements.

Due to high cost, a hospital typically uses only a few fixed Reader placed at strategic location to cover entire floor area. But that also brings down effectiveness of tracking. Large inaccuracy of location with RFID based RTLS is a common refrain.

How BLE is different?

Most Hospital RTLS employs active RFID hardware which typically uses the regulation-free 2.4GHz. This is the same frequency band that is used in Microwave Ovens all over the world, as well as Bluetooth Devices and basic WiFi network. Given the low power gain used, it is considered safe.
BLE stands for Bluetooth Low Energy and is used in sensor network ubiquitously. Being lightweight, the devices come with very small form factor.  BLE works in the same way as active RFID. But since BLE standard is open, BLE devices have proliferated a lot faster. That effectively has brought down the cost of BLE tags and BLE gateways. BLE gateways cost 10 times lesser than a RFID reader and it can use the hospital's WiFi network which  in turn brings down the overall installation cost for BLE based RTLS.

For a 40 room hospital, it was reported to cost below USD 100K. However, we should remember, the cost of BLE tags are higher compared to passive RFID tags and battery of a BLE tag typically needs replacement every 1-2 years.

Active RFID vs BLE

Both of them need battery which means it requires periodic battery replacement. Additionally active RFID devices and tags are relatively more costly. More importantly vendor lock-in is one major aspect of using active RFID hardware. In comparison BLE devices are available off-the-shelf and can be upgraded / replaced with different vendor's products at ease without any service downtime.

A ready comparison chart

Feature UHF RFID BLE
Frequency Band 860–956 MHz 2.4 GHz
Range Up to 100 meters (depending on tag and reader / antenna)  less than UHF RFID
Data Rate Up to 640 kbps Up to 2 Mbps
Accuracy Typically within a margin of a few meters. Passive tags sometimes are missed by the Readers during periodic scanning Better than RFID. BLE Tags send the data themselves - eliminating the issue of missed scans.
Power Consumption Passive tags require no power; active tags have batteries Low power consumption; suitable for battery-powered devices
Cost Passive tags are cost-effective; active tags are more expensive Generally low-cost due to widespread adoption
Typical Applications Asset tracking, inventory management, supply chain logistics Asset tracking, personnel monitoring, proximity marketing, indoor navigation
Tag Cost Passive UHF RFID tags: Approximately $0.10 to $0.50 per tag.
Active RFID tags: Approximately $5 to $15 per tag.
BLE tags: Approximately $2 to $10 per tag.
Reader/Gateway Cost Fixed RFID readers: Approximately $1,400 to $8,000 per unit.

Handheld RFID readers: Approximately $1,000 to $4,500 per unit.

BLE gateways: Approximately $100 to $500 per unit.

INDTRAC Approach

INDTRAC promises to work with almost all leading BLE and passive UHF RFID readers. INDTRAC also qualifies vendor hardware before they are recommend to you so that you can choose the technology most suited for your use case and budget without any worries. For BLE tags, INDTRAC proactively monitors the battery and alerts you to replace the battery when a tag battery loses the power. BLE tags mostly use ubiquitously available low-cost coin lithium battery which makes the replacement cost very marginal.
There is another advantage with using BLE -- you can seamlessly use the RTLS to monitor zone-wise temperature, humidity or VOC almost at the same expense as that of asset tracking infrastructure.